Cli-mate CLI-AP30 Spezifikationen PDF herunterladen (Seite 39)

5.1.8. Asphalt Shingle Roof Mounting

a) Apricus recommends EcoFasten Solar flashings that can easily

be slipped under 3 tab composition roofing and secured to the roof

framing member. The frame front tracks can be attached to the

flashing bracket with a U-foot (available from Apricus).

Image to the right shows the standard EcoFasten Z shaped bracket.

b) Unistrut can be mounted with the same method if installing an

adjustable angle kit with a track frame. This is a clean, reliable

method for mounting to asphalt shingle roofs.

For more information visit http://www.ecofastensolar.com

5.1.9. Tiled Roof Mounting

a) For tiled roofs, use a flashing designed for solar mounting such

as the one shown to the right from QuickMount PV. This style can

be molded to the shape of the tiles and forms a strong and

watertight flashing.

For more information visit http://www.quickmountpv.com

5.2. Mounting on Suitable Angle Pitched Roof (Standard

Frame)

Refer to Appendix 1 for assembly diagram.

5.2.1. Installation Planning

a) Carefully plan the location of the collector frame and plumbing pipes

in order to align with the roof framing members and develop the shortest

pipe run possible to the storage tank. Any penetrations in the roof or

building shell must be sealed with standard roofing materials and/or

appropriate sealants to avoid leaks.

5.2.2. Positioning Manifold

a) Securing to Roof: The manifold and bottom track can slide left and

right in relation to the standard frame channels, so there is some

flexibility when selecting the location. The standard frame channels should be located so that they lay flat,

are parallel with one another and, if possible, aligned with the roof rafters. If the frame cannot be aligned

with the roof rafters, a rafter upgrade may need to be perform by adding additional wood to the framework.

Consult an engineer to ensure roof designs and rafter upgrades meet structural requirements.

b) Manifold and Bottom Track Alignment: Ultimately, each Evacuated Tube will be installed with the Heat

Apricus Solar Collector Installation & Operation Manual - USA

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 119 120

Keine Kommentare

Cli-mate CLI-AP30 Spezifikationen Seite 39