Cli-mate CLI-AP30 Spezifikationen PDF herunterladen (Seite 54)

Extra Functions

(Only available if the corresponding Extra function was selected in the Service menu)

2.11 Thermostat Function

2.11.1 Start

When the water temp. at the location of T3 drop below this setting P3 will start.

2.11.2 Hysteresis

When the water temp. at the location of T3 exceeds the Start temperature plus the Hysteresis setting, P3 will

shutoff.

2.12 Cooling Function

2.12.1 Cooling start

When the water temp. in the top of system tank (T3) is above this setting P3 will start

2.12.2 Cooling hysteresis

When the water temp. at the top of system tank (T3) falls below the Start temperature minus the Hysteresis setting

P3 will shutoff

2.13 Diffcontrol Function

2.13.1 Max cold tank

When the temp. at the top of the external tank (T3) is above this setting P3 will shutoff

2.13.2 Min warm tank

When the temp. at the top of the system tank (T4) is above this setting P3 will start

2.13.3 Max cold tank

When the temp. at the top of the system tank (T3) is above this setting P3 will shutoff

2.13.4 Min warm tank

The temp. at the top of the external tank (T4) is above this setting P3 will start

2.13.5 dTMax

Temperature difference (ΔT) between the tank designated as cold storage (TC) and the one designated as warm

storage (TW) at which P3 will start

2.13.6 dTMin

Temperature difference (ΔT) between TC and TW at which P3 shutoff

3 Operation

3.1 Automatic and Off operation

To turn ON the system, change the setting to AUTOMATIC

3.2 Manual testing operation

This mode allows you to check the performance of all pumps, valves and sensors

4 Operation Hours

This menu offers both a data view and a graph view for the Operation, dT, Power and Energy values.

Operation

Displays data and graph view of operation hours

Displays data and graph view of temperature differential

Power

Displays data and graph view of kBTU/hour

Energy

Displays data and graph view of kBTU

4.1 SD Card option

To store data and transfer system settings from your PC to the Solar Control

5 Temperatures

This menu displays the temperatures of all connected sensors.

T1 – Collector

Displays the temperatures of collector1 sensor

T2 – Collector2

Displays the temperatures of collector2 sensor

Tank1 bottom

Displays the temperatures of tank bottom sensor

Tank top

Displays the temperatures of tank top sensor

6.7. Controller Display & Operation

1: Simplified drawing of the installation.

Apricus Solar Collector Installation & Operation Manual - USA

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 119 120

Kommentare zu diesen Handbüchern

Keine Kommentare

Cli-mate CLI-AP30 Spezifikationen Seite 54

Kommentare zu diesen Handbüchern